Nactus Optical System with 24 Lenses – Module dimensions: 178,0mm x 137,16mm (the DS version does not hold the pocket on one side for the cable entrance, the sides are flat) – IESNA Type III
Nactus Optical System with 24 Lenses
Module dimensions: 178,0mm x 137,16mm side
IESNA Type III
Description: 24 LED 55W 5500lm 5000K
IF (Nominal Current): 700mA
H (Pole Height): 6m
BOOM (Boom Length): 0m
RW (Road Width): 6m
P2P (Pole to pole distance): 3.75xH
Category (Road Lighting Class): ME4A
Lave (Average Luminance): 0,85
UO (Overall Uniformity): 0,60
UI (Longitudinal Uniformity): 0,70
Description: 24 LED 55W 5500lm 5000K
IF (Nominal Current): 700mA
H (Pole Height): 6m
BOOM (Boom Length): 0m
RW (Road Width): 6m+2m(sw)
P2P (Pole to pole distance): 3.75xH
Category (Road Lighting Class): ME4A+S2
Lave (Average Luminance): 0,78
UO (Overall Uniformity): 0,60
UI (Longitudinal Uniformity): 0,70
Description: 24 LED 55W 5500lm 5000K
IF (Nominal Current): 700mA
LED (Nominal LED Luminous Flux): 230lm
H (Installation Height): 4m
P2P (Pole to Pole Distance): 20m
Category (Road Lighting Cass): S1/Syde+Bike
EAVE (Average Illuminance): 22
Emin (Minimum Illuminance): 7,00
Emin/Emax (Min. to Max Illuminance Ratio): 0,12
Emin/Eave (Min. to Ave. Illuminance Ratio): 0,32
The DS version does not hold the pocket on one side for the cable entrance. Therefore all the sides of the DS version are flat. The cable entrance service of the panel is provided by a central hole.
One side of DS panel is gloss finish unlike the other sides and the panel that are frosted finish.
When mounting the panel onto the end application, the gloss side needs to be close to the support: pole, wall, peg, etc.
Easy assembly: insert the screws into the perimeter holes and fasten the module to the PCB. Preset for the housing of sensors.
The panel come IP protected with a silicone gasket placed in the perimeter groove.
On request, the multi-lens array is available with PCB for testing (LED Board (DEMO)).
The NACTUS Optical System is Patented.
————————————————– Part Number ————————————————-
KNAC2402ADS [optic in DS version]
KNAC2402ADS1X [optic in DS version + LED Board (DEMO)]
KNAC2402ADSIP [optic in DS version with a silicone gasket (IP protected)]
KNAC2402ADSIP1X [optic in DS version with a silicone gasket (IP protected) + LED Board (DEMO)]
Product images are for illustrative purposes only. All the data contained in this page are the property of Khatod Optoelectronic Srl and may change without prior notice. Production, marketing, distribution, sale of these products as well as their possible modifications and variations are only and exclusive right of Khatod Optoelectronic S.r.l. No company can perform any of these actions without written permission released by Khatod Optoelectronic S.R.L. – REPRODUCTION PROHIBITED –
Khatod Optoelectronic Srl
Via Alessandrina, 25
20095 Cusano Milanino, (MI) Italia
Teléfono +39.02.6601.3695
Fax +39.02.6601.3500
E-mail: khatod@khatod.com
Suscríbete al boletín de noticias de Khatod