Silicone lenses

Lenses made of Silicone
The LEDs of latest generation - High Brightness LEDs - achieve very high temperatures which could put strain on the conventional polymers such as PMMI, PMMA and PC.
- Silicone is much more resistant to high temperatures
- Silicone considerably reduces the yellowing effect, so making perfect for the outdoor applications. No extra protection, as for example glass in case of head-pole, and no gasket for IP insulation are needed
- As an isotropic material, Silicone provides with high flexibility which allows an easy fit to the final application
- As an elastomer, Silicone provides a perfect compensation for the construction mechanical tolerances typical of the final application

Silicone Lenses: SIR50 - SILICONE Internal Reflection for COB LEDs

SIR50 - SILICONE Internal Reflection for COB LEDs

TIR LENSES made of Ultra-Clear LSR, optimized for COB LEDs systems with LES ranging 6mm to 9mm diameter, for any application in General Lighting.
Size: Diameter 50.00mm - Height 29.00mm | Beam Angles: Narrow, Medium, Wide
Standard Compliance: Comply with MR16

Silicone Lenses: SIO3 - SILICONE LENSES for COB LEDs

SIO3 - SILICONE LENSES for COB LEDs

The LEDs of latest generation - COB LEDs – achieve very high temperatures which could put strainon the conventional polymers such as PMMI, PMMA and PC. The typical features of silicone make silicone lenses perfect for outdoor applications or indoor applications in damp and wet environments.
Optimized for most popular COB LEDs. Designed for Street Light applications, comply with IESNA Standards: Type I - Type II - Type III - Type IV - Type V, Short or Medium light distribution depending on the LED used; ME3a. Excellent in any application in Wide Area Lighting, Outdood and Indoor. Preserve and enhance the typical characteristics of silicone.

(Show video >>)

Silicone Lenses: PL50SIL Lens made of Silicone

PL50SIL - Lens made of SILICONE

The LEDs of latest generation - High Brightness LEDs - achieve very high temperatures which could put strain on the conventional polymers such as PMMI, PMMA and PC.
- Silicone is much more resistant to high temperatures
- Silicone considerably reduces the yellowing effect, so making PL50SIL perfect for the outdoor applications. No extra protection, as for example glass in case of head-pole, and no gasket for IP insulation are needed
- As an isotropic material, Silicone provides PL50SIL with high flexibility which allows an easy fit to the final application
- As an elastomer, Silicone provides a perfect compensation for the construction mechanical tolerances typical of the final application

Product images are for illustrative purposes only. All the data contained in this page are the property of Khatod Optoelectronic Srl and may change without prior notice. Production, marketing, distribution, sale of these products as well as their possible modifications and variations are only and exclusive right of Khatod Optoelectronic S.r.l. No company can perform any of these actions without written permission released by Khatod Optoelectronic S.R.L. - REPRODUCTION PROHIBITED -